Factory Production Area - Refurbished by Floor Painters Limited - Using Solvent Free Epoxy Coating.
The Area was an Epoxy screed with many demarcation lines applied. Due to a change in the areas usage these needed to be removed. The area also had some damage which required to be repaired due to being a health & Safety risk.
The Project Area
Preparation & Repairs
The area was prepared by diamond grinding and all repairs where cut square to remove any lose edges.
.jpg "Floor Painters Limited - Floor Preparation")
All repairs where then carried out using an Epoxy resin screed to match the existing floor depth.
Installation of New Epoxy Coating system with slip resistant profile.
A two coat system was then applied to the prepared area. Aggregate was applied to the 1st coat to provide a uniformed slip resistant profile before a top coat of Solvent free epoxy coating was applied so seal in the aggregate. Yellow demarcation lines where install around the road way and perimeter to clearly identify the work area. Leaving our client with a brand new work area suitable for its new usage.
No comments:
Post a Comment